MATERIAL DATA SHEETS

-185° 350° 500° 600° 1200°

COLD CHECK BLUE RED SILVER HEAT CHECK

IT’S THESE DIFFERENT PRODUCT DESIGNS THAT ALLOW YOU “TO MATCH YOUR INSPECTION PORT TO YOUR OPERATING TEMPERATURE”

500º F Degree

(Standard Red)

Access Plug Flange

THIS INFORMATION IS FOR TECHNICAL USE ONLY.

OUR PRODUCT LINE IS PROTECTED UNDER U.S. AND INTERNATIONAL PATENT LAW.

Available Sizes

· 11/2" Contoured

o Designed To fit 5" – 6” O.D. jacketing

· 1 1/2" Flat

o Can Be Contoured As Required

· 1 3/4" Contoured

o Designed To fit 5” - 6" O.D. jacketing

· 1 3/4" Flat

o Can Be Contoured As Required

· 2 1/2" Flat

o 1 1/4" Corrugated transition gasket available

o 2 1/2" Flat can be field cut to fit 5" O.D. jacketing and larger

· 2½” Heat Check

o Up To 1200° Operating Temperature

· 2½” X 12” Flat

o 5” Min O.D. Jacketing – Excellent For Process Level Inspection On Vessels

· 4" Flat

o 1 1/4" Corrugated transition gasket available

· 5" Flat

o 1 1/4" Corrugated transition gasket available

· 2½” Cold Check

o Down To –185° Operating Temperature

o Ability To Test While Still Online

Aluminum Flange:

• Aluminum Alloy 3003 Temper 0 - .032" Thick
• Physical Analysis:
• Ultimate Tensile Strength (UTSI) =17.8 - 17.9
• Typical Yield (TYSI) =7.5 - 7.6
• Elongation (EL4D) =28.5 - 29.5

Stainless Steel Flange(Optional):

• Steel Alloy T304 Annealed 2B Finish 8% Minimum Nickel - .020" Thick
• Physical Analysis:
• YIELD 2% = 43300
• TENSILE = 101000
• ELONGATION = 61
• R15T = 83
• Grain = 8

Strain Relief Washer Molded Into Plug:

• Stainless Steel Flat Washer .156 x .375 x .049 (to provide strain relief for lanyard)

Lanyard Assembly:

• 1/16" 7x7 Stainless Steel Wire Rope/Flexible Aircraft Style Construction
• 7 Strands with 7 wire per strand
• Alloy:
• 3020/304 Stainless Steel
• Copper Oval Pressed Sleeve
•  Type 102 (UNSC 10200) or Type 103 (UNSC 10300) or Type 122 (UNSC 12200) in accordance with ASTM 875

Silicon Plug

• Compound #SVX-1619A-6 RED Silicon
• Compression Molded
• Physical Analysis:
• Durometer A = 45 - 55
• Tensile > 700
• Elongation > 350%
• Tear Die B > 50.
• High resistance to ultraviolet radiation.

"O" Ring:

• Compound # N7001 Nitrile
• Physical Properties:
• Durometer A = 70
• Tensile = 2130
• Elongation = 470%

Corrugated Transition Gasket:

• Compound #110-60 Neoprene
• Physical Properties:
• Hardness, Shore A = 60
• Ultimate Tensile 2770 P.S.I.
• Elongation = 625%
• Tear = 318 P.S.I.

· High Resistance to ultraviolet radiation

· (Available for 2 1/2", 4” and 5” Flanges)

COPYRIGHT 2002 Access Plug Flange, Inc. ALL RIGHTS RESERVED